200W 6-in-1 Moving Head DJ Party Light with Tripod Stand

Light Source & Optical

• Beam Heads: 2 × (4 × 3W RGBW LEDs), 15 Static Colors
• Wash Heads: 2 × (6 × 4W RGBW 4-in-1 LEDs), 15 Static Colors
• Gobo Ball Heads: 2 × RGW Magic Ball with Green, Cyan, and Yellow Gobo Patterns, 3 Selectable Colors
• LED Rings: 6 × (14 × 5050 RGB 3-in-1 LEDs), 7 Static Colors + 20 Auto Effects
• Amber Strobe: 5 × 10W Amber LEDs, 31 Strobe Effects
• Laser: 50mW Red + 100mW Green
• Head Movement: 360° Pan, 180° Tilt, Adjustable SpeedDimming: 0–100% Master Dimmer
• Strobe: Variable Speed, Slow to Fast

Control & Connections

• Control Modes: DMX512, Auto, Sound Active, Wireless Remote, Master-Slave
• DMX Channels: 2 Modes — 12 / 30 Channels
• DMX Map (12 CH): CH1 pan (all heads), CH2 tilt (all heads), CH3 pan/tilt speed, CH4 master dimmer, CH5 strobe, CH6 beam color, CH7 wash color, CH8 gobo color, CH9 ring color and effects, CH10 red and green laser, CH11 amber strobe, CH12 program mode
• DMX Map (30 CH): CH1–12 individual pan and tilt for heads 1–6, CH13 pan/tilt speed, CH14 master dimmer, CH15 strobe, CH16–27 individual color and ring control for heads 1–6, CH28 red and green laser, CH29 amber strobe, CH30 program mode
• Built-In Programs: 4 Auto Modes + 2 Sound Modes, plus Individual Auto Modes for Beam, Wash, Gobo, Laser, and Strobe
• Sound Sensitivity: Adjustable 0–100 via Built-In Microphone
• Display: 4-Digit LED Display with Menu / Up / Down / Enter
• Data Connectors: DMX In/Out
• Remote: 14-Key Wireless Remote (Included); Remote On/Off via System Menu
• DMX Signal Loss: Blackout

Electrical & Physical

• Power Consumption: 200W
• Input Voltage: AC 95–245V, 50/60Hz (Auto-ranging)
• Fuse: 250V
• Cooling: Built-In Fan
• Protection Rating: IP20 (Indoor Use Only)
• Max Ambient Temperature: 104°F (40°C)
• Mounting: Tripod Stand (Included) or Truss via 2 Hanging Brackets with M10 Mounting Holes
• Tripod Height: 53.5–86.6 in (136–220 cm); Folded 37.2 in (94.5 cm)
• Overall Height on Tripod: Up to 91.7 in (233 cm)
• Dimensions: 39.4 × 3.9 × 8.3 in (100 × 10 × 21 cm)
• Weight: 22.3 lb (10.1 kg)

Installation

• Tripod: Pull out the three legs, raise the support rod to the height you need, seat the light bar on top, and tighten all three locking knobs.
• Truss: Fit the two hanging brackets, then attach suitably rated clamps (not included) at the M10 mounting holes. Always add a safety cable when the fixture is suspended.
• Placement: Keep at least 1.6 ft (0.5 m) from objects and surfaces, 8 in (20 cm) from flammable materials, and about 6 in (15 cm) from walls so the vents stay clear.
• Laser Safety: Aim the laser effects at least 9.8 ft (3 m) above the audience. Never direct beams at people, reflective surfaces, or aircraft.
• Power: Plug into a properly grounded outlet. Never connect the fixture to a dimmer pack.

Cleaning

• Lenses: Disconnect power, then wipe the head lenses with a soft, dry microfiber cloth.
• Housing: Wipe the bar and tripod with a dry cloth. Keep water and other liquids away from the fixture and remote.
• Vents: Keep the fan and ventilation openings free of dust.

Maintenance

• Cool-Down: Allow about 15 minutes for the fixture to cool before handling, servicing, or packing it.
• Inspection: Check the tripod locking knobs, safety latch, hanging brackets, and any rigging hardware before each use.
• Storage: Power the fixture down when it is not in use, and store it in the carry bag in a dry place.
• Service: There are no user-serviceable parts inside. Contact YeeSite support if the fixture is damaged or stops working normally.

For detailed instructions, check out the user guide.