80W 5-in-1 Laser Disco Ball DJ Party Light

Light Source & Optical

• Disco Ball: 3 × 3W RGB LEDs, 7 Colors, Variable Rotation Speed
• Laser: 100mW Red + 30mW Green + 100mW Blue, Multiple Pattern Effects
• White Strobe & UV: 4 × (3 × 3W LEDs)
• UV Wavelength: 395–400nm
• RGB Pixel Panels: 2 Panels, 64 × 0.3W RGB LEDs, 15 Effects
• Dimming: 0–100% Master Dimmer
• Strobe: Variable Speed, Slow to Fast

Control & Connections

• Control Modes: DMX512, Auto, Sound Active, IR Remote, Master-Slave
• DMX Channels: 1 Mode — 11 Channels
• DMX Map (11 CH): CH1 motor speed, CH2 master dimmer, CH3 strobe, CH4 disco ball color and speed, CH5 laser color and patterns, CH6 white strobe, CH7 UV dimmer, CH8 pixel effects, CH9 pixel speed, CH10 auto programs and sound mode, CH11 auto speed
• Built-In Programs: 16 Auto Programs + 2 Sound Modes
• Sound Sensitivity: 15 Levels via Built-In Microphone
• Display: 4-Digit LED Display with Menu / Up / Down / Enter
• Remote: 11-Button IR Remote (Included)
• Power Connection: IEC Power In with On/Off Switch
• Power Cable: 3.3 ft (1 m)
• Data Connectors: 3-Pin XLR DMX In/Out

Electrical & Physical

• Power Consumption: 80W
• Input Voltage: AC 110–240V, 50/60Hz (Auto-ranging)
• Cooling: Built-In Fan
• Protection Rating: IP20 (Indoor Use Only)
• Max Ambient Temperature: 122°F (50°C)
• Mounting: Adjustable U-Bracket with M10 Clamp Attachment Point
• Dimensions: 17.3 × 5.1 × 6.7 in (44 × 13 × 17 cm)
• Weight: 5.1 lb (2.3 kg)

Installation

• Floor or Table: Set the fixture on a stable, level surface, angle it with the U-bracket, and tighten both side knobs.
• Truss: Attach a suitably rated clamp (not included) to the M10 point on the bracket. Always add a safety cable when the fixture is suspended.
• Placement: Keep at least 1.6 ft (0.5 m) from objects and surfaces and 8 in (20 cm) from flammable materials. Leave the fan and vents clear.
• Laser & UV Safety: Never aim the lasers at people, reflective surfaces, or aircraft. Avoid direct eye and skin exposure to the UV light closer than 11 ft (3.3 m).
• Power: Plug into a properly grounded outlet. Never connect the fixture to a dimmer pack.

Cleaning

• Lenses: Disconnect power, then wipe the lenses with a soft, dry microfiber cloth.
• Housing: Wipe the housing with a dry cloth. Keep water and other liquids away from the fixture and remote.
• Vents: Keep the cooling fan and ventilation openings free of dust.

Maintenance

• Cool-Down: Allow about 15 minutes for the fixture to cool before handling or servicing it.
• Inspection: Check the bracket knobs, power cord, and any rigging hardware before each use.
• Storage: Disconnect power when the fixture will not be used for a long time, and store it in a dry place.
• Service: There are no user-serviceable parts inside. Contact YeeSite support if the fixture is damaged or stops working normally.

For detailed instructions, check out the user guide.