30W RGB LED Stage Pixel Light Bars

Light Source & Optical

• LEDs per bar: 120 × 5050 RGB 3-in-1 SMD LED (240 LEDs total across the pair)
• Pixel segments: 20 independently controllable segments per bar
• Beam angle: 360° (tube design)
• Built-in effects: 60 show programs, 61 static colors, 20 program speeds, 19 strobe speeds
• Sound sensitivity: 9 levels (2 sound modes)

Control & Connections

• Control modes: DMX-512, Master-Slave, Auto, Sound Active, Program Show, Static Color (6 total)
• DMX channel modes: 5 CH / 8 CH / 60 CH (per-pixel RGB) / 65 CH (per-pixel RGB + program + background)
• DMX map (5 CH): CH1 master dim, CH2 strobe, CH3 static color / program select, CH4 static color / program speed, CH5 background color
• DMX map (8 CH): adds independent Red / Green / Blue master channels (CH3–5) for full color control alongside program select
• DMX map (60 CH): full per-segment RGB control — CH1–3 for segment 1 RGB, CH4–6 for segment 2 RGB, through CH58–60 for segment 20 RGB
• DMX map (65 CH): adds master dim, strobe, program select, and background color on top of the 60 CH per-pixel map
• RDM: Yes — remote fixture configuration and monitoring supported
• Connectors: 3-pin XLR DMX In / DMX Out (per bar)
• Display: 4-digit LED display with MENU / UP / DOWN / ENTER buttons
• IR remote: Included with each bar, 120° receive angle
• Built-in microphone for sound-reactive mode

Electrical & Physical

• Power consumption: 30W per bar (60W total for the 2-pack)
• Input voltage: AC 110–240V, 50/60Hz (wide-voltage, universal)
• Housing: Aluminum tube + plastic base, IP20 (indoor use only)
• Anti-slip base with M10 threaded mounting hole
• Max ambient temperature: 104°F (40°C)
• Minimum distance to flammable materials: 8 in (0.20 m)
• Minimum distance to objects/surfaces: 1.6 ft (0.5 m)
• Mounting: Freestanding on anti-slip base, or overhead via M10 truss clamp (not included) + safety cable
• Dimensions per bar (L × W × H): 46 × 11 × 7.48 in (117 × 28 × 19 cm)
• Tube dimensions: 40.55 in tall × 1.96 in diameter
• Base dimensions: 4.52 × 4.52 × 2.95 in
• Weight per bar: 7.5 lb (3.4 kg) — pair weighs 15 lb (6.8 kg) total

Installation

• Position: Set each bar upright on its anti-slip base, or mount overhead via the M10 threaded hole on the base — floor stand and truss orientations are both fully supported.
• Overhead safety: Always use an M10 mounting clamp (not included) plus a safety cable rated for suspended lighting when rigging above people.
• Clearance: Keep each bar at least 8 in (0.20 m) away from flammable materials and 1.6 ft (0.5 m) from any object or surface.
• Ventilation: Ensure open airflow around the tube; do not enclose the fixture in a tight space.
• Electrical: Do not plug into a dimmer pack. Each bar runs on any AC 110–240V outlet.

Cleaning

• Tube: Wipe the aluminum tube and lens cover with a soft, dry cloth after each event to remove dust and fog residue.
• Base: Use a lens-safe cleaner monthly on the LED strip for consistent brightness.
• Power off: Always disconnect from the mains before cleaning.

Maintenance

• Cool-down: Allow 15 minutes for each bar to cool before servicing or repacking.
• Storage: Store both bars in original packaging in a dry, dust-free space between events.
• Inspection: Check the anti-slip base, M10 mount hole, DMX connectors, and power cord before every install.

For detailed instructions, check out the user guide.