150W RGBWA+UV LED Wall Washer Wash Light Bar

Light Source & Optical

• Light Source: 24 × 6-in-1 RGBWA+UV LEDs
• Power Draw: 150 W
• Beam Angle: 25°
• Color Mixing: red, green, blue, white, amber, and UV, individually dimmable 0–100%
• Static Colors: 22 preset colors
• Show Programs: 102 built-in programs with adjustable speed
• Strobe: 19 speeds, slow to fast

Control & Connections

• Operating Modes: DMX512, master-slave, auto, program show, static color
• DMX Channel Modes: 6CH / 8CH / 11CH / 144CH / 149CH
• 6CH Map: CH1 red, CH2 green, CH3 blue, CH4 white, CH5 amber, CH6 UV (all 0–100%)
• 8CH Map: CH1 master dimmer, CH2 strobe, CH3–CH8 red / green / blue / white / amber / UV
• 11CH Map: CH1 master dimmer, CH2–CH7 red / green / blue / white / amber / UV, CH8 strobe, CH9 built-in programs, CH10 program speed, CH11 background color
• 144CH Map: 6 channels (R/G/B/W/A/UV) per LED × 24 LEDs for full pixel control
• 149CH Map: CH1 master dimmer, CH2–CH145 per-LED R/G/B/W/A/UV × 24, CH146 strobe, CH147 built-in programs, CH148 program speed, CH149 background color
• Master-Slave: link up to 64 slave units to one master
• Control Panel: LED digital display with MODE / ENTER / UP / DOWN buttons
• Display Setting: backlight auto-off after 10 / 20 / 30 / 60 seconds, or always on
• Temperature Protection: user-set limit (50–65) automatically dims output to cool down
• Connectors: waterproof 3-pin power in/out and 3-pin DMX in/out with screw-fixed ports

Electrical & Physical

• Voltage: AC 110–240 V, 50/60 Hz wide voltage
• IP Rating: IP65 (dust-tight, protected against water jets)
• Maximum Ambient Operating Temperature: 104°F (40°C)
• Housing: aluminum alloy with vent valve
• Mounting: two 360° adjustable brackets; mounts flat, sideways on trussing, or hanging upside down
• Dimensions (L × W × H): 41.7 × 4.3 × 7.9 in (106 × 11 × 20 cm)
• Bar Length: 39.4 in (100 cm)
• Weight: 13.7 lb (6.2 kg)

Installation:

• Mount the bar in any position — flat on the ground, sideways on trussing, or hanging upside down — using the two included 360° adjustable brackets (M10 fixing points).
• Always attach a safety cable when rigging overhead (mounting clamp and safety cable not included).
• Keep the fixture at least 8 in (20 cm) from flammable materials and 1.6 ft (0.5 m) from any object or surface.
• Allow at least 6 in (15 cm) between the fixture and a wall for ventilation, and never block the vent valve.
• Have all electrical connections made by a qualified electrician; never connect the fixture to a dimmer pack.
• Intended for temporary outdoor use only; not suitable for maritime or coastal environments.

Cleaning

• Disconnect power and allow about 15 minutes for the fixture to cool before handling.
• Wipe the housing and lens with a soft, dry cloth.
• Never open the unit or use solvents on the sealed housing.

Maintenance:

• No user-serviceable parts inside — do not open the fixture or attempt repairs, as this voids the warranty.
• Disconnect from mains power when left unused for long periods.
• Stop using the fixture immediately if the power cord is frayed or the housing is damaged.
• Route power cords away from foot traffic so they cannot be walked on or pinched.

For detailed instructions, check out the user guide.